Description

:

A single pack Multicolor coating manufactured to stringent U.K. testing procedures, based on modern resins and having a plastic like appearance.

Product Features &
Recommended Uses

:

INTERFLEK has a slight sheen for greater wash-ability and resistance to soiling. Interflek can be applied to almost any surface where hard wearing attractive decoration is required. Applied by one simple operation and if damaged, can be “touched up” locally to blend without being apparent.

INTERFLEK is antistatic and does not attract airborne dust thereby reducing the cost of maintenance and thus contributing to hygiene.

INTERFLEK'S thick plastic type film imparts extreme durability and hardness, together with the Multicolor pattern camouflaging existing surface irregularities.

Volume Solids

:

21%

P. H.

:

7 – 8

Film Thickness

:

Wet Microns 190
Dry Microns 40

Theoretical Coverage

:

5.25 M2 / Liter

Application

:

Conventional Air Spray Equipment – See overleaf

Drying Times

:

10 C

23 C

35 C

Dust Free

2 Hours

1 Hour

1 Hour

Hard Dry

16 Hours

12 Hours

8 Hours

Over Coating

Min

10 Minutes

5 Minutes

2 Minutes

Max

No Limit

No Limit

No Limit

Health & Safety Regulations

:

Flammable - Paint Product U.N. No. 1263. Use only in well ventilated areas.
Do not breathe vapor or spray. If insufficient ventilation, wear suitable respiratory equipment.
In case of contact with eyes, rinse immediately with plenty of water.
In case of contact with skin, wash immediately with soap and water or recognized skin cleaner.
Keep out of reach of children.

Colors

:

Please refer to catalogue.

Finish

:

Slight sheen with light texture.

Pot-life at 23 C

:

Indefinite.

Product Weight

:

1.011 Kilos per liter.

Storage Conditions

:

Store in cool, dry conditions. Protect from frost and high temperatures.

Mixing Ratio

:

N/A

Thinners

:

Do not thin.

Product Notes

:

Does not use on surface subject to heavy condensation i.e. shower cubicles etc,
Class “0” Fire Resistance as per UK Building Regulation 1976 Section E15.
Do not clean finished surface with solvent or solvent based cleaners.

Surface Preparation

:

All surfaces must be dry, clean and free from loose and flaking material, dirt, grease and nicotine.

Apply one coat of good quality primer in appropriate color and allow minimum of 4 hours before re-coating. This primer may be thinned up to 5% depending on porosity of brickwork.

On metal surfaces, remove all rust and mill-scale and apply one coat of phosphor etch primer prior to application of Interflek primer. This etch primer must be over coated with in 24 hours.

Flash Point

:

Greater than 45 deg. C

Viscosity

:

89 – 92 Ku/30 ْc

Equipment Cleaner

:

Water-occasionally turpentine.

Application Notes

:

Method

Airless Spray

Automatic Spray

Ordinary Spray

Brush or Roller

Output Fluid Pressure

N/A

N/A

20-30 lbs PSI

N/A

Tip Size

N/A

N/A

Med / Large Internal Mix

N/A

Shake can well before opening then gently stir; do not thin. Apply by conventional spray using internal mix cap.
To ensure continuity of pattern, pressures should not be allowed to fluctuate during spraying process.
Spray using cross-lap technique. Work across and down the surface first then down and across for second spray pass.
Practical coverage tends to be 3.3/4.5 sq. meters per liter.