Type

:

An Styrene Acrylic Emulsion based Primer Sealer  for all weather condition.

Use

:

General purpose water base Primer Sealer formulated for use as Primer Coat for Emulsion & Texture Paint to sealing the surface for better adhesion and preventing absorption of highly porous surface. It is suitable for Int. /Ext. surface like Plaster, Wall Concrete, Cement and Gypsum etc.

Important Features

:

1. Very good priming capacity.
2. Excellent adhesion and quick drying and very easy for application.
3. Very good flow and leveling properties.
4. High Alkali and Weather Resistance.

Technical Information

:

Appearance               
Viscosity               
Density
Color                       
Spreading Rate    
Solid by volume     
Dry Film Thickness  
Dry
Through Dry                       Finish
Flash Point                 
Over Coat

: THIXOTROPIC
: 126 ± 10Ku at 30 Deg
: 1.54 ± 0.05 Kg /Lit.
: White
: 10–12 Sq./Ltrs , depends upon the nature of Surface.
: 35%
: 20 microns/ per coat
: 1 – 2 Hours
: 2 Hours
: Matt
: Non Flammable
: After 4 Hours

Shelf Life

:

One Year in Sealed drums.

Storage

:

Under Shade. Keep away from direct Sun Light and freezing Condition, clean, cool and dry place.

Surface Preparation

:

The surface should be sound dry and clean and free from dirt, oil grease and other loose paints.

Old Painted Surface

:

Remove old cracked film of paint and other.

New Surface

:

All loose dirt and powder and other contamination must be removed. Alkaline and Lime containing surface must be Flushing with pure water. Surface must be clean and dry before application. After full preparation of surface , Apply INTER PRIMER SEALER for making the good surface for subsequent coat

Application

:

By Brush Roller or Spray Gun. Stir well before use.

Thinner

:

Pure and clean water.

Thinner Ratio

:

10% to 15% by volume for Roller and Spray.

Precautions

:

Do not apply below 5 Deg. C and on wet condition. Ensure good ventilation during Application and avoid Breathing mist. Keep away from Children.

Safety

:

Follow the Standard Safety measures as required for Decorative Coating System