Type

:

An Styrene Acrylic Emulsion based Putty.

Use

:

As a Putty, It can be used for Interior and Exterior surface like Plaster concrete, Walls, etc and in filling for small cracks, holes of surface for making  the perfect Surface.

Important Features

:

1. Very smooth and easy application.
2. Non sagging and excellent adhesive strength.
3. It gives leveled surface suitable for subsequent coat.

Technical Information

:

Appearance               
Viscosity               
Density
Color                        
Spreading Rate    
Solid by volume     
Dry Film Thickness  
Dry
Through Dry                       Finish
Flash Point                 
Over Coat

: THIXOTROPIC
: Paste
: 1.69 ± 0.03 Kg /Lit.
: White
: 05–07 SqM. / Ltrs
: 60%
: 100 Microns/ per coat
: 1 – 2  Hours
: 5 – 6  Hours
: Smooth, Matt
: Non Flammable
: After 8 Hours

Shelf Life

:

Two Years in original sealed drums.

Storage

:

Under Shade. Keep away from direct Sun Light and freezing Condition, clean, cool and dry place.

Recommended  System

:

The surface should be sound dry and clean and free from dirt, oil grease and other loose paints. Remove old cracked film of paint and other. Surface must be clean and dry before application. After full preparation of surface , apply one coat of INTER PRIMER SEALER, then apply INTER WALL PUTTY  two coats, after  drying sand the Putty and clean the surface for subsequent coats

Application

:

By stainless steel putty knife or Spatula.

Thinner

:

Pure and clean water, Generally not required.

Precautions

:

Do not apply below 5 Deg. C and on wet condition. Ensure good ventilation during Application and avoid Breathing mist. Keep away from Children.

Safety

:

Follow the Standard Safety measures as required for Decorative Coating System