Type

:

Water based polychromatic finish, with a very pleasing satin appearance, used as top-coat for Inter-pearl Textured finish. It is safe to use and environmentally friendly.

Use

:

INTERPEARL is a highly decorative textured material for interior use that can be applied in a variety of way to produce wonderful effects. INTERPEARL is a two part material consisting of a base coat and a finish coat or polish coat.

Important Features

:

1. Very Smooth and Easy application.
2. Washable and extremely pleasant looking
3. It is odourless, non-toxic, washable an environmentally friendly.

Technical Information

:

Appearance               
Viscosity               
Density
Color                       
Spreading Rate    

Solid by volume     
Dry Film Thickness  
Surface Dry
Through Dry                       Finish
Flash Point                 

: THIXOTROPIC
: 92 - 120 Ku at 30  ْC
: 1.03 ± 0.05 Kg /Lit.
: As per our Shade Card
: 06–08 Sq./Ltrs , but variation should be  expected, depending on the type patter required.
: 32%
: 30 microns/ per coat
: 1 - 2 Hours
: 3 - 4 Hours
: Glossy
: Non Flammable – water diluents

Shelf Life

:

Two Year in Sealed pack.

Storage

:

Under Shade. Keep away from direct Sun Light and freezing Condition, clean, cool and dry place.

Surface Preparation

:

The surface should be sound dry and clean and free from dirt, oil grease and other loose paints.

Old Painted Surface

:

Remove old cracked film of paint and other.

New Surface

:

All loose dirt and powder and other contamination must be removed. Alkaline and Lime containing surface must be Flushing with pure water. After full drying prime the Surface to be painted with Inter Primer Sealer. Fill the holes and cracks with Inter Wall Putty. After drying Sand the putty and clean the surface for subsequent coats.

Application

:

By Brush, Roller, or  Spray. Stir well before use. As indicated in the catalogues, but this is also a product with self creating effect.

Thinner

:

Single pack, ready to use. But can be slightly thinned with  Pure and clean water.

Thinner Ratio

:

10% to 15% by volume for Roller , Brush and Spray Gun.

Precautions

:

Do not apply below 5 Deg. C and on wet condition. Ensure good ventilation during Application and avoid Breathing mist. Keep away from Children.

Safety

:

Follow the Standard Safety measures as required for Decorative Coating System