Type

:

A High Gloss Thermoplastic Resin based top coat.

Use

:

As a top coat on Interior and Exterior surface wall, cement, concrete, Gypsum, wood and steel surface etc., particularly as a top coat on Texture.

Important Features

:

1. Excellent durability and scratch resistance.
2. Quick drying with excellent adhesion on approximately all surface.
3. Excellent weather resistance and good coverage.
4. Excellent gloss and color retention.

Technical Information

:

Appearance               
Viscosity               
Density
Color                       
Spreading Rate    
Solid by volume     
Dry Film Thickness  
Dry
Through Dry                       Finish
Flash Point                 
Over Coat

: Liquid.
: 88 ± 10 K.U. at 30 Deg.
: 1.08 ± 0.03 Kg /Lit.
: White or Color
: 10–12 SqM. / Ltrs Depending upon the surface.
: 43%
: 30 Microns/ per coat
: 1/2  Hours
: 2 Hours
: High Gloss.
: 27 Deg. C
: After 8 Hours

Shelf Life

:

One Years in original sealed drums.

Storage

:

Under Shade. Keep away from direct Sun Light and freezing Condition, clean, cool and dry place.

Recommended  System

:

The surface should be sound dry and clean and free from dirt, oil grease and other loose paints. Remove old cracked film of paint and other. Surface must be clean and dry before application. If the porosity of the surface is high then apply the suitable coat of Primer. Then Apply Two Coats of Inter – Cryl Top Coat.
(Not recommended on old Gloss Enamel Surface).

Application

:

By Roller, Brush, Spray. Stir well before use.

Thinner

:

Inter Thinner.

Precautions

:

Do not apply below 5 Deg. C and on wet condition. Ensure good ventilation during Application and avoid Breathing mist. Keep away from Children.

Safety

:

Use  Gloves, Mask during application.
Follow the Standard Safety measures as required for Decorative Coating System